SKU:T-3F30-SRGB
2012-2018 BMW 3 Series F30 / M3 F80 Sequential LED Tail Lights Assembly — 4-Piece Set
Product Videos
Smoked White Laser Line
- Regular price
- $429.00
- Sale price
- $429.00
- Regular price
-
$669.00
Check if this fits your vehicle
Compatibility
Fits: 2012-2018 BMW 3 Series Sedan (F30, 4-door only) and 2015-2018 BMW M3 Sedan (F80) — all trims, including 320i, 328i, 335i, 340i, and xDrive AWD.
Does not fit: F31 Touring wagon · F34 3 Series Gran Turismo · F32 / F33 / F36 4 Series · M4 (F82 / F83)
Not sure it fits? Check the fitment guide →Questions about fit? Message us on WhatsApp
RIGNOX
2012-2018 BMW 3 Series F30 / M3 F80 Sequential LED Tail Lights Assembly — 4-Piece SetSmoked RGB Laser Line w/ App Control
- Regular price
- $429.00
- Sale price
- $429.00
- Regular price
-
$669.00
Free Shipping · 30-Day Returns
Free Shipping · 30-Day Returns
Free Shipping · 3–5 business days
Free
Ships the same day via FedEx, UPS or Amazon Shipping from our East and West Coast warehouses — 3–5 business days anywhere in the U.S. Delivery estimates may vary due to carrier or weather delays.
Pre-Order (New Release) · 1-2 Weeks
Free
Applies only to items marked "New Release." These ship about 1–2 weeks after the first batch lands — order now to lock today's price and your spot in line. In-stock items ship the same day, as above.
Redesigned from the Lens Out.
The F30's rear end is defined by its light bar signature, and these redraw it. Every function runs on LEDs, so the lens lights instantly and evenly — including on Pre-LCI cars that left the factory with halogen bulbs back there.
Built for your rig. Made for the night.
One assembly, Pre-LCI and LCI. BMW changed the tail light connector pinout between Pre-LCI (2012-2015) and LCI (2016-2018), so factory lamps can't be swapped between the two without an adapter harness. The conversion circuit is built into this assembly on every build — the same part plugs straight into either car, with no adapter and no coding.
A complete four-piece set. Left and right outer housings on the body, plus left and right inner lenses on the trunk lid. The rear reads as one continuous line instead of new outers sitting next to faded factory inners.
No F30 or F80 M3 left the factory with a sweeping signal — stock turn signals fire as one solid block on every trim, Pre-LCI and LCI alike. Here the amber turn sweeps outward through the lens, and the full pattern runs once as a startup animation each time the lights power on. Reverse runs on high-output LEDs instead of the dim factory bulb. No external controller, nothing to configure once the harness is plugged in.
Two light signatures, three builds. Laser draws a 0.8–1.5 mm light line across the lens — razor-sharp edges, almost no glow — the closest read to what BMW itself moved toward on later cars. Y-Bar splits the signature into a wide Y instead, a heavier and more deliberate shape that reads as a full redesign rather than an upgrade of the original.
Then the finish. Smoked White Laser Line is the clean, OEM-plus build — a laser line that looks cut into the smoked lens. Smoked RGB Laser Line w/ App Control runs the same laser line in app-controlled color. Y-Bar Smoked Red keeps a red signature behind the smoked lens in the Y-Bar layout. Every build is DOT/SAE compliant — on public roads, run the RGB build in red and save the color modes for shows and meets. Turn signals stay amber on every build.
Built on patented optical technology and independently tested for vibration, mechanical shock, and corrosion resistance. The lens is UV-stable polycarbonate, so it holds its clarity instead of yellowing after a few summers.
Running, brake, reverse and turn all keep the factory logic, and the assembly uses the original mounting points and seals. Installation is plug-and-play into the factory harness. Integrated anti-flicker decoders hold the correct flash cadence — no hyper-flashing, no dash errors.
Compatibility
Fits: 2012-2018 BMW 3 Series Sedan (F30, 4-door only) and 2015-2018 BMW M3 Sedan (F80) — all trims, including 320i, 328i, 335i, 340i, and xDrive AWD.
Does not fit: F31 Touring wagon · F34 3 Series Gran Turismo · F32 / F33 / F36 4 Series · M4 (F82 / F83)
Main Characteristics
Light Output
Functions
Tail, brake, turn, and reverse — all LED, 25W
Brightness
Higher luminous intensity than halogen, with even output across the lens and no dark spots
Brake Response
Reaches full brightness 200ms sooner than halogen — about 18 feet of extra reaction room for the driver behind you at 60 mph
Reverse
High-output white LED for real backup visibility at night
Street Legal
DOT and SAE compliant (FMVSS 108)
Light Signature
Laser Line
0.8–1.5 mm light line with razor-sharp edges and almost no glow — reads like a line cut into the lens. LED light source.
Turn Signal & Animation
Amber sequential sweep, plus a startup animation when the lights power on
Style with Color
Smoked RGB Laser Line w/ App Control · Smoked White Laser Line · Y-Bar Smoked Red
App Control
Controlled from your phone with the Happy Lighting app, with left and right locked in sync
Color
Smoked RGB Laser Line w/ App Control · T-3F30-SRGB
Smoked lens, RGB Laser Style — Happy Lighting app
Smoked White Laser Line · T-3F30-SW
Smoked lens, White + Red Laser Line
Y-Bar Smoked Red · T-3F30-Y-SR
Smoked lens, Red LED bars
Build
Housing & Materials
Black housing, anti-UV polycarbonate lens that won't yellow, pressure-equalizing breather vents
Light Source
Solid-state LED — no filament to burn out, and no warm-up lag
LED Lifespan
50,000 hours
Power Draw
Uses 70% less power than an equivalent halogen assembly
Cooling
Aluminum heat-sink base with a temperature-control IC that holds output steady over time
Weather Sealing
IP67 — sealed against rain, dust, and road spray
Tested For
Vibration, mechanical shock, and corrosion resistance
Installation
Plug-and-play into the factory harness, with CANbus decoders built in — no cutting, no splicing, no dash errors. Everything needed to prevent hyper-flash is included — built into the light or packed in the box
Guides and Documents
- Installation Instructions
- Fitment Guides
Get Seen. Get Noticed. Put On a Show.
Four things separate a RIGNOX tail light from a stock housing: the signature you wear, the finish that lasts, the brake light that registers sooner, and the show it runs at night.Any Color You Want, Over Bluetooth
Applies to: Smoked RGB Laser Line w/ App Control
Any Color, Anytime
Pair over Bluetooth with the free Happy Lighting app — pick any fixed color from the wheel or a preset to match your paint, your wheels, your mood. No extra controller, no wiring.
Living Animations
Run dynamic effects — flow, breathing, gradient, chase — across the light bar for a rear end that's never static.
Tuned to Taste
Slide to set animation speed and brightness until it's exactly the look you want.
Lights Stay Honest
Brake, tail, turn, and reverse always run their correct DOT colors. Color is show; the safety signal is business.
Full App Setup & Pairing Guide →
Images show lighting concepts for illustration only and may differ from actual output. The app interface shown is representative — see the full app guide for real setup and controls.
Unique Features
hrs
Rated LED Lifespan
% less
Less Power Than Halogen
Matte Black
Aggressive and Sporty Aesthetic
Mounts
Factory-Fit Install
The RIGNOX Standard
- 10K+Orders shipped
- 20+Years in lighting
- 80+Vehicle fitments
- Complete assemblies, not bulb kits
- Factory mounts, factory harness
- Built with patented optical parts
- Third-party tested LEDs
- DOT / SAE compliant
- CANbus decoders built in
