RIGNOX prius headlights installed aftermarket lights with clear left copy space

Collection: Toyota Prius

Bought to be sensible, kept for a decade. The halogen housings are what give a third-gen Prius away.

Showing 1 of 1 Product
1 Result
Complete LED assemblies, engineered for one vehicle at a time.

Bolt on. Light up. Done.

RIGNOX doesn't sell bulbs or tint film. Every set is a full replacement assembly built for a specific year range — DOT/SAE compliant, plug-and-play, and backed by a 2-year warranty.
Technician Installing LED Tail Light

Not a Bulb Kit

Every RIGNOX product is a complete assembly — housing, LEDs, lens and light bar as one sealed unit. You unbolt the factory light and bolt this one in. Nothing to tint, nothing to retrofit.
Bold LED DRL Monochrome

A Light Signature

On most models, an animated startup sequence and sequential amber turn signals at both ends — the part of the upgrade people notice before they notice anything else about your build.
OEM Plug-and-Play Connector

Factory Fit

Built on the factory mount architecture with OEM connectors and integrated CANBUS decoders — bolts into the stock location with no cutting and no splicing.
IP67 Weatherproof Durability

Built to Stay

Sealed to IP67 behind a UV-stable polycarbonate lens with anti-fog coating, rated for a 50,000-hour lifespan, with LEDs that passed independent lab testing for vibration, shock, and corrosion.
We've got you covered at every step.

Service That Moves With You

FAQ

No Confusion, Just Clear Answers

Use the vehicle selector at the top of the page — pick your make, model and year and it takes you to everything that fits. Every RIGNOX listing is built for a specific year/make/model, and the Compatibility section on each product spells out trims and exclusions. Still unsure? Send us your trim and factory light type and we'll confirm before you buy.

The whole light. Every RIGNOX product is a complete assembly — housing, LEDs, lens and light bar as one sealed unit that replaces the factory part outright. You're not swapping bulbs, tinting a lens, or retrofitting anything into your old housing.

Plug-and-play. RIGNOX assemblies connect to your factory harness with integrated decoders — no cutting, no splicing. Everything needed to prevent hyperflash and dash codes is included — built into the light or packed in the box; how to tell hyperflash from flicker and what to check first is in this diagnosis guide. Vehicle-specific Installation Guides walk you through the install, and if you'd rather not do it yourself, any shop can install them. It depends on your vehicle and how hands-on you are, but most installs take about 1–2 hours.

Headlights run a clear lens with a sharp cutoff and are DOT/SAE compliant (FMVSS 108); tail lights keep a red brake and tail signature behind a Clear or Smoked lens. RGB and color modes are show features — the road-going white beam and red brake/tail stay in spec. What the DOT marking actually means is in our DOT guide; whether a smoked tail light passes in your state is in are smoked tail lights legal. Color is show; the road light is business.

RIGNOX assemblies are rated for a 50,000-hour lifespan — years of daily driving. They run a constant-current driver that holds brightness steady instead of dimming with voltage swings, and headlights add an active aluminum base to pull heat away from the LEDs. The LEDs inside passed independent lab testing for vibration, shock, and corrosion.

Every RIGNOX set ships with a 2-year limited warranty against defects and a 30-day return window, backed by direct US-based support. Defective or wrong items are covered by RIGNOX including return shipping. Add Shipping Protection in your cart to cover loss or damage in transit. Report a problem on our warranty page and we reply within one business day. A thin mist inside a lens after a cold night is normal on any vented lamp and not a defect; the automaker rule for telling fog from a leak is in normal fog or a real leak.

Most vehicles keep their blind-spot sensors in the rear bumper, so your system is unaffected. A few trucks house the module in the tail light — those listings carry a BLIS note on the product card and in the Compatibility section. Check it before ordering.

Auto headlights, Auto High Beam, DRL behavior and turn signals are vehicle-side signals and carry over. You can always level the beam: models with powered leveling keep your dash dial and auto-leveling, and the rest are leveled with adjustment screws. Swiveling AFS headlights aren't supported, and vehicles with factory matrix/ADB headlights are not compatible. The full feature-by-feature table: which factory features carry over.

Why Owners Upgrade

Toyota Prius LED headlights

The third-generation Prius was bought for the numbers on the window sticker, and a decade later those numbers still hold up. What has not held up is the lighting — clouded halogen housings that give the car's age away from the front.

Because so few of these get modified, a rebuilt front end reads as deliberate rather than loud. It is the cheapest way to make a sensible car look like it was chosen rather than defaulted to.

RIGNOX covers the 2012-2015 Prius XW30 with a projector headlight in two builds — two bi-function cups per side, or three for a denser signature and more reach on high beam. Both carry a white daytime light, a sequential amber turn signal and an amber side marker.

Complete assemblies, not bulb kits. Plug-and-play into the factory harness, sold as a pair and backed by a 2-year warranty.