SKU:T-EQU18-SR
2018-2024 Chevrolet Equinox LED Tail Lights Assembly — 4-Piece Set
- Regular price
- $329.00
- Sale price
- $329.00
- Regular price
-
$479.00
Fits 2018–2024 Chevrolet Equinox
Factory halogen tail lights only
Compatibility
Fits: 2018-2024 Chevrolet Equinox L / LS / LT with factory halogen (bulb-type) tail lights
Does not fit: Models with factory LED tail lights
- Plug-in install Plugs into the factory harness.
- No dash warnings Everything needed to prevent hyper-flash and dash warnings is included.
- Install guide Step-by-step guide for this model →
- Regular price
- $329.00
- Sale price
- $329.00
- Regular price
-
$479.00
Redesigned from the Lens Out.
The Equinox is one of the most common compact SUVs on the road, which makes the rear end the fastest place to set yours apart.
Built for your rig. Made for the night.
Red LED bars sit behind a smoked lens and carry the running and brake output, with a white reverse section below. The turn signal flashes red, sharing the brake circuit as the factory lights do.
Four-piece set. Two outer lights on the body and two inner lights on the liftgate, so the whole rear end matches.
Built on patented optical technology and independently tested for vibration, mechanical shock, and corrosion resistance.
Installation is plug-and-play into the factory harness, with integrated anti-flicker decoders — no hyper-flashing, no dash errors.
Compatibility
Fits: 2018-2024 Chevrolet Equinox L / LS / LT with factory halogen (bulb-type) tail lights
Does not fit: Models with factory LED tail lights
Main Characteristics
Light Output
Functions
Tail, brake, turn, and reverse — all LED, 25W
Brightness
Higher luminous intensity than halogen, with even output across the lens and no dark spots
Brake Response
Reaches full brightness 200ms sooner than halogen — about 18 feet of extra reaction room for the driver behind you at 60 mph
Reverse
High-output white LED for real backup visibility at night
Street Legal
DOT and SAE compliant (FMVSS 108)
Light Signature
Turn Signal
Red flash
Color
Finish
Smoked lens, Red LED bars
Build
Housing & Materials
Black housing, anti-UV polycarbonate lens that won't yellow, pressure-equalizing breather vents
Light Source
Solid-state LED — no filament to burn out, and no warm-up lag
LED Lifespan
50,000 hours
Power Draw
Uses 70% less power than an equivalent halogen assembly
Cooling
Aluminum heat-sink base with a temperature-control IC that holds output steady over time
Weather Sealing
IP67 — sealed against rain, dust, and road spray
Tested For
Vibration, mechanical shock, and corrosion resistance
Installation
Plug-and-play into the factory harness, with CANbus decoders built in — no cutting, no splicing, no dash errors. Everything needed to prevent hyper-flash is included — built into the light or packed in the box
Guides and Documents
- Installation Instructions
-
Compatibility
Get Seen. Get Noticed. Put On a Show.
Four things separate a RIGNOX tail light from a stock housing: the signature you wear, the finish that lasts, the brake light that registers sooner, and the show it runs at night.
A Signature You Can See Coming
Blacked Out or Crystal Clear
Brakes That Register Sooner
Sequential + Startup Show
Unique Features
hrs
Rated LED Lifespan
% less
Less Power Than Halogen
Matte Black
Aggressive and Sporty Aesthetic
Mounts
Factory-Fit Install
The RIGNOX Standard
- 10K+Orders shipped
- 20+Years in lighting
- 80+Vehicle fitments
- Complete assemblies, not bulb kits
- Factory mounts, factory harness
- Built with patented optical parts
- Third-party tested LEDs
- DOT / SAE compliant
- CANbus decoders built in