They fit the 2016–2023 Toyota Tacoma (3rd Gen) with factory halogen headlights, whether or not your original headlights have the LED daytime light strip. They don't fit trucks that came with factory LED headlights, so check your original headlights before you order.
In-stock orders ship the same day, 7 days a week, and delivery takes 3–5 business days after shipping. Shipping is free to the contiguous U.S., and each item ships separately with its own tracking number. If it's out of stock, the estimated ship date is shown under the price.
Yes. The lights plug into the factory connectors with no cutting or splicing, and everything needed to prevent hyper-flash and dash warnings is built into the light or packed in the box. The same set fits halogen trucks with or without the factory LED daytime light, and everything your Tacoma needs is in the box. The installation guide walks through both setups.
Yes to both. The C-shaped daytime running light runs white, then switches to amber and sweeps outward in sequence when you signal. A startup animation traces the ring the moment the lights power on, and the amber corner marker stays lit alongside it.
Four LED projector cups per side lay down a controlled beam with a defined cutoff — light on the road ahead, not in oncoming eyes. Adjustment screws on each housing let you level the beam after install. The LED engine sits on an aluminum base with active cooling, so output holds steady instead of fading as the housing heats up, and the LED light source is built in, so there are no bulbs to change.
Yes. Blacked-out internals give the assembly a smoked look when the lights are off, while the clear lens keeps the projector cutoff intact on the road. The lens is UV-coated polycarbonate, so it holds its clarity instead of yellowing. They're built on patented optical technology, independently tested for vibration, mechanical shock and corrosion resistance, and covered by a 2-year warranty — if anything fails, we can send a replacement part.
A little moisture right after install is normal. Humid air gets trapped inside the housing, and when the lights are first switched on it can show up as fog or small droplets. With regular use it clears on its own, usually within about a week, and it can also appear for a few days after a car wash, rain or a big temperature swing. If it's still there after a week, contact us with your order number and we'll take care of it.

