SKU:T-ACC10-SDG
2018-2022 Honda Accord 10th Gen Sequential LED Tail Lights Assembly
Product Videos
Smoked Digital w/ App Control
Clear White Fishbone
Clear White Starry Sky
Smoked Starry Sky RGB w/ App Control
- Regular price
- $559.00
- Sale price
- $559.00
- Regular price
-
$959.00
Fitment Check
Compatibility
Fits: 2018-2022 Honda Accord 10th Gen — all trims including LX, EX, Sport, EX-L, Touring, and Hybrid.
OEM Cross Reference: Left / Driver Side 33550-TVA-A01; Right / Passenger Side 33500-TVA-A01.
Fitment Note: Hybrid tail lights are the same for fitment purposes.
Not sure it fits? Check the fitment guide →
RIGNOX
2018-2022 Honda Accord 10th Gen Sequential LED Tail Lights AssemblySmoked Digital w/ App Control
- Regular price
- $559.00
- Sale price
- $559.00
- Regular price
-
$959.00
Free Shipping & Returns
Free Shipping & Returns
Free U.S. shipping on every order. 30-day returns and exchanges, started from your order confirmation email. 2-year Warranty covering LED failure, moisture intrusion, and component malfunctions under normal use.
Standard Shipping · 2–5 business days
Free
Ships via FedEx from our East or West Coast warehouse. Delivery estimates may vary due to carrier or weather delays.
Pre-Order (New Release) · 1-2 Weeks
Free
Applies only to items marked "New Release." These ship about 1–2 weeks after the first batch lands — order now to lock today's price and your spot in line. In-stock items ship in 2–5 business days, as above.
Redesigned from the Lens Out.
The 10th-gen Accord was Honda deciding a family sedan could have a fastback roofline and a turbo. The car earned its respect — the factory tail lights never quite kept up with the rest of it.
Built for your rig. Made for the night.
Every function runs on LEDs, so the housing lights instantly and evenly with none of the warm-up lag or burnout cycle of filament bulbs. The turn signal fires as a sweep rather than a single flash, and the full pattern runs once on ignition as a startup animation. No external controller, nothing to configure once the harness is plugged in.
Six builds, in three tiers. Fishbone runs an angled rib pattern through the housing — in Clear White, Smoked Red, or Smoked RGB with app control. Starry Sky scatters the light into points instead — in Clear White or Smoked RGB with app control. Smoked Digital w/ App Control sits above both: an addressable panel rather than a single-colour bar, which is where the price difference comes from.
Built on patented optical technology and independently tested for vibration, mechanical shock, and corrosion resistance. The lens is UV-stable polycarbonate, so it holds its clarity instead of yellowing after a few summers.
Installation is plug-and-play into the factory harness. Integrated decoders and an LED flash relay hold the correct flash cadence — no hyper-flashing, no dash errors.
Compatibility
Fits: 2018-2022 Honda Accord 10th Gen — all trims including LX, EX, Sport, EX-L, Touring, and Hybrid.
OEM Cross Reference: Left / Driver Side 33550-TVA-A01; Right / Passenger Side 33500-TVA-A01.
Fitment Note: Hybrid tail lights are the same for fitment purposes.
Main Characteristics
Light Output
Functions
Tail, brake, turn, and reverse — all LED, 25W
Brightness
Up to 6× brighter than halogen, with even output across the lens and no dark spots
Brake Response
Reaches full brightness 200ms sooner than halogen — about 18 feet of extra reaction room for the driver behind you at 60 mph
Reverse
High-output white LED for real backup visibility at night
Street Legal
DOT and SAE compliant (FMVSS 108)
Light Signature
Turn Signal & Animation
Amber sequential sweep, plus a startup animation on ignition
Style with Color
Smoked Digital w/ App Control · Clear White Fishbone · Smoked Red Fishbone · Smoked Fishbone RGB w/ App Control · Clear White Starry Sky · Smoked Starry Sky RGB w/ App Control
App Control
Controlled from your phone with the Star Light Running app, plus a one-touch red-light remote, with left and right locked in sync
Color
Smoked Digital w/ App Control · T-ACC10-SDG
Smoked lens, Digital LED bars — Star Light Running app
Clear White Fishbone · T-ACC10-FSH-CW
Clear lens, White LED bars
Smoked Red Fishbone · T-ACC10-FSH-SR
Smoked lens, Red LED bars
Smoked Fishbone RGB w/ App Control · T-ACC10-FSH-SRGB
Smoked lens, RGB LED bars — Star Light Running app
Clear White Starry Sky · T-ACC10-SS-CW
Clear lens, White LED bars
Smoked Starry Sky RGB w/ App Control · T-ACC10-SS-RGB
Smoked lens, RGB LED bars — Star Light Running app
Build
Housing & Materials
Black housing, anti-UV polycarbonate lens that won't yellow, pressure-equalizing breather vents
Light Source
Solid-state LED — no filament to burn out, and no warm-up lag
LED Lifespan
50,000 hours
Power Draw
Uses 70% less power than an equivalent halogen assembly
Cooling
Aluminum heat-sink base with a temperature-control IC that holds output steady over time
Weather Sealing
IP67 — sealed against rain, dust, and road spray
Tested For
Water, dust, corrosion, and shock resistance
Installation
Plug-and-play into the factory harness, with built-in CANBUS decoders and an LED flash relay — no cutting, no splicing, no hyper-flashing, no dash errors
Guides and Documents
- Installation Instructions
- Fitment Guides
Get Seen. Get Noticed. Put On a Show.
Four things separate a RIGNOX tail light from a stock housing: the signature you wear, the finish that lasts, the brake light that registers sooner, and the show it runs at night.
A Signature You Can See Coming
Blacked Out or Crystal Clear
Brakes That Register Sooner
Sequential + Startup Show
App + Remote, Mode by Mode
Applies to: Smoked Fishbone RGB w/ App Control, Smoked Starry Sky RGB w/ App Control
App + Remote
Dial it in from the free Starlight Running app, then switch to a static red driving light with one tap on the included remote — no phone needed when you're rolling.
Mode by Mode
Set distinct effects for Driving, Startup, and Turn-Signal lighting — each its own show, not one effect for everything.
Any Color, Any Effect
Pick any color from the wheel, run dynamic animations, or auto-cycle them all across the full bar — your build, your palette.
Locked Left to Right
Master-and-slave signal cabling keeps both sides perfectly synced for one seamless light show.
Programmable, Segment by Segment
Applies to: Smoked Digital w/ App Control
Addressable, Not Just Color
The digital bar is individually addressable — color flows along its length instead of the whole bar changing at once, so you get patterns a standard RGB bar can't run.
A Deeper Library of Patterns
Driving, startup, and turn-signal modes carry far more animation patterns than RGB — chases, gradients, and traveling effects, selectable from the app's Mode list.
Flow, Chase, Segment
Run flowing, chasing, and segmented sequences across the bar, set speed and brightness, or let it auto-cycle the whole library.
Same App + Remote
Controlled by the same Starlight Running app and included remote, with master-and-slave cabling keeping both sides in sync.
Full App Setup & Pairing Guide →
Images show lighting concepts for illustration only and may differ from actual output. The app interface shown is representative — see the full app guide for real setup and controls.
Unique Features
hrs
Rated LED Lifespan
% less
Less Power Than Halogen
Matte Black
Aggressive and Sporty Aesthetic
Splicing
Plug-and-Play Harness
The RIGNOX Standard
- 10K+Orders shipped
- 20+Years in lighting
- 60+Vehicle fitments
- Complete assemblies, not bulb kits
- Factory mounts, factory harness
- Patented optical technology
- Vibration, shock & corrosion tested
- DOT / SAE compliant
- Decoders included, no dash errors
Fitment & Installation Notice
The display is unlike any other taillight setup I’ve seen on an Accord. The smoked housing keeps it subtle when viewed from the side, while the illuminated digital pattern immediately grabs your attention. Definitely a fun choice for a custom build.
It adds a lot of detail without making the rear of my Accord look too busy, Very clean setup overall.
5/5 stars! I’m seriously loving how these smoked starry sky RGB tail lights changed the whole look of my Accord. The difference from the factory lights is night and day — the rear end looks cleaner, more modern, and way more customized even when the lights are off. The fitment was perfect and the quality feels amazing. Huge thanks to Rignox for creating such a great upgrade and making my car look even better. I’m very happy with the final result!
Honestly, I was a bit skeptical about changing the OEM tails, but these sequential lights are an absolute game changer. The start-up animation looks incredibly premium and the smoked lens looks mean on my black Accord.
Installation was pretty straightforward—mostly plug-and-play, took me about 45 minutes in my garage. Just a heads-up, make sure to tuck the wiring harness nicely so nothing rattles. They’ve been on the car for 3 weeks now, through two heavy rainstorms, and no condensation issues at all. If you’re on the fence, just get them. Best aesthetic mod for the 10th gen by far!