SKU:T-SEN20-SW
2020-2025 Nissan Sentra Sequential Laser LED Tail Lights Assembly
Product Videos
Smoked White
Smoked RGB w/ APP Control
- Regular price
- $299.00
- Sale price
- $299.00
- Regular price
-
$519.00
Fitment Check
Compatibility
Fits: 2020-2025 Nissan Sentra B18, including S, SV, SR, Midnight Edition, and SR Premium.
OEM Cross Reference: Outer Body Tail Lights: Left 26555-6LB0A; Right 26550-6LB0A.
Fitment Note: All supported trims use the same LED outer body tail light fitment.
Not sure it fits? Check the fitment guide →
- Regular price
- $299.00
- Sale price
- $299.00
- Regular price
-
$519.00
Free Shipping & Returns
Free Shipping & Returns
Free U.S. shipping on every order. 30-day returns and exchanges, started from your order confirmation email. 2-year Warranty covering LED failure, moisture intrusion, and component malfunctions under normal use.
Standard Shipping · 2–5 business days
Free
Ships via FedEx from our East or West Coast warehouse. Delivery estimates may vary due to carrier or weather delays.
Pre-Order (New Release) · 1-2 Weeks
Free
Applies only to items marked "New Release." These ship about 1–2 weeks after the first batch lands — order now to lock today's price and your spot in line. In-stock items ship in 2–5 business days, as above.
Redesigned from the Lens Out.
Nissan finally gave the Sentra a body worth looking at with the B18 — lower, wider, borrowed from cars further up the range. The rear end has the width for a real light signature and the factory only half used it.
Built for your rig. Made for the night.
Every function runs on LEDs, so the housing lights instantly and evenly with none of the warm-up lag or burnout cycle of filament bulbs. The turn signal fires as a sweep rather than a single flash, and the full pattern runs once on ignition as a startup animation. No external controller, nothing to configure once the harness is plugged in.
Two builds. Smoked White runs a white signature behind a smoked lens — the cleaner of the two, and the one that reads sharpest against a dark car. Smoked RGB w/ APP Control puts the accent colour on your phone for shows and meets.
Built on patented optical technology and independently tested for vibration, mechanical shock, and corrosion resistance. The lens is UV-stable polycarbonate, so it holds its clarity instead of yellowing after a few summers.
Installation is plug-and-play into the factory harness. Integrated decoders and an LED flash relay hold the correct flash cadence — no hyper-flashing, no dash errors.
Compatibility
Fits: 2020-2025 Nissan Sentra B18, including S, SV, SR, Midnight Edition, and SR Premium.
OEM Cross Reference: Outer Body Tail Lights: Left 26555-6LB0A; Right 26550-6LB0A.
Fitment Note: All supported trims use the same LED outer body tail light fitment.
Main Characteristics
Light Output
Functions
Tail, brake, turn, and reverse — all LED, 25W
Brightness
Up to 6× brighter than halogen, with even output across the lens and no dark spots
Brake Response
Reaches full brightness 200ms sooner than halogen — about 18 feet of extra reaction room for the driver behind you at 60 mph
Reverse
High-output white LED for real backup visibility at night
Street Legal
DOT and SAE compliant (FMVSS 108)
Light Signature
Turn Signal & Animation
Amber sequential sweep, plus a startup animation on ignition
App Control
Controlled from your phone with the Happy Lighting app, with left and right locked in sync
Color
Smoked White · T-SEN20-SW
Smoked lens, White LED bars
Smoked RGB w/ APP Control · T-SEN20-SRGB
Smoked lens, RGB LED bars — Happy Lighting app
Build
Housing & Materials
Black housing, anti-UV polycarbonate lens that won't yellow, pressure-equalizing breather vents
Light Source
Solid-state LED — no filament to burn out, and no warm-up lag
LED Lifespan
50,000 hours
Power Draw
Uses 70% less power than an equivalent halogen assembly
Cooling
Aluminum heat-sink base with a temperature-control IC that holds output steady over time
Weather Sealing
IP67 — sealed against rain, dust, and road spray
Tested For
Water, dust, corrosion, and shock resistance
Installation
Plug-and-play into the factory harness, with built-in CANBUS decoders and an LED flash relay — no cutting, no splicing, no hyper-flashing, no dash errors
Guides and Documents
- Installation Instructions
- Fitment Guides
Get Seen. Get Noticed. Put On a Show.
Four things separate a RIGNOX tail light from a stock housing: the signature you wear, the finish that lasts, the brake light that registers sooner, and the show it runs at night.Any Color You Want, Over Bluetooth
Applies to: Smoked RGB w/ APP Control
Any Color, Anytime
Pair over Bluetooth with the free Happy Lighting app — pick any fixed color from the wheel or a preset to match your paint, your wheels, your mood. No extra controller, no wiring.
Living Animations
Run dynamic effects — flow, breathing, gradient, chase — across the light bar for a rear end that's never static.
Tuned to Taste
Slide to set animation speed and brightness until it's exactly the look you want.
Lights Stay Honest
Brake, tail, turn, and reverse always run their correct DOT colors. Color is show; the safety signal is business.
Full App Setup & Pairing Guide →
Images show lighting concepts for illustration only and may differ from actual output. The app interface shown is representative — see the full app guide for real setup and controls.
Unique Features
hrs
Rated LED Lifespan
% less
Less Power Than Halogen
Matte Black
Aggressive and Sporty Aesthetic
Splicing
Plug-and-Play Harness
The RIGNOX Standard
- 10K+Orders shipped
- 20+Years in lighting
- 60+Vehicle fitments
- Complete assemblies, not bulb kits
- Factory mounts, factory harness
- Patented optical technology
- Vibration, shock & corrosion tested
- DOT / SAE compliant
- Decoders included, no dash errors

