SKU:T-ACC11-SW
2023-2026 Honda Accord 11th Gen Sequential LED Tail Lights Assembly — 3-Piece Set
Free when you tick the headlights above — rechargeable, sticks to the fender while you install, 7.5 hrs on high, battery display.
- Regular price
- $349.00
- Sale price
- $349.00
- Regular price
-
$649.00
Check if this fits your vehicle
Compatibility
Fits: 2023-2026 Honda Accord 11th Gen Sedan, including LX, EX / SE, Sport Hybrid, EX-L Hybrid, Sport-L Hybrid, and Touring Hybrid.
Not sure it fits? Check the fitment guide →Questions about fit? Message us on WhatsApp
- Regular price
- $349.00
- Sale price
- $349.00
- Regular price
-
$649.00
Free Shipping · 30-Day Returns
Free Shipping · 30-Day Returns
Free Shipping · 3–5 business days
Free
Ships the same day via FedEx, UPS or Amazon Shipping from our East and West Coast warehouses — 3–5 business days anywhere in the U.S. Delivery estimates may vary due to carrier or weather delays.
Pre-Order (New Release) · 1-2 Weeks
Free
Applies only to items marked "New Release." These ship about 1–2 weeks after the first batch lands — order now to lock today's price and your spot in line. In-stock items ship the same day, as above.
Redesigned from the Lens Out.
The 11th-gen Accord went wider and calmer, and built its rear end around one horizontal line. This set carries that line all the way across the trunk lid instead of stopping at the quarter panels — which is the difference between a tail light swap and a rear end that looks redesigned.
Built for your rig. Made for the night.
Every function runs on LEDs, so each one lights up instantly and evenly with none of the warm-up lag or burnout cycle of filament bulbs. The turn signal fires as a sweep rather than a single flash, and the full pattern runs once as a startup animation each time the lights power on. No external controller, nothing to configure once the harness is plugged in.
The full set includes the trunk lid pair, not just the outer housings. Both halves of the light bar are replaced, so the signature reads continuous with the trunk closed — worth knowing when you're comparing against listings that only cover the quarter panels.
Three builds. Smoked Red stays closest to factory. Smoked White shows a white bar with the lights off, which reads cleaner against a dark car; switched on, it lights red. Smoked RGB w/ App Control puts the accent color on your phone for shows and meets.
Built on patented optical technology and independently tested for vibration, mechanical shock, and corrosion resistance. The lens is UV-stable polycarbonate, so it holds its clarity instead of yellowing after a few summers.
Installation is plug-and-play into the factory harness. Integrated anti-flicker decoders hold the correct flash cadence — no hyper-flashing, no dash errors.
Compatibility
Fits: 2023-2026 Honda Accord 11th Gen Sedan, including LX, EX / SE, Sport Hybrid, EX-L Hybrid, Sport-L Hybrid, and Touring Hybrid.
Main Characteristics
Light Output
Functions
Tail, brake, turn, and reverse — all LED, 25W
Brightness
Higher luminous intensity than halogen, with even output across the lens and no dark spots
Brake Response
Reaches full brightness 200ms sooner than halogen — about 18 feet of extra reaction room for the driver behind you at 60 mph
Reverse
High-output white LED for real backup visibility at night
Street Legal
DOT and SAE compliant (FMVSS 108)
Light Signature
Turn Signal & Animation
Amber sequential sweep, plus a startup animation when the lights power on
App Control
Controlled from your phone with the Star Light Running app, plus a one-touch red-light remote, with left and right locked in sync
Color
Smoked White · T-ACC11-SW
Smoked lens, White LED bars
Smoked Red · T-ACC11-SR
Smoked lens, Red LED bars
Smoked RGB w/ App Control · T-ACC11-SRGB
Smoked lens, RGB LED bars — Star Light Running app
Build
Housing & Materials
Black housing, anti-UV polycarbonate lens that won't yellow, pressure-equalizing breather vents
Light Source
Solid-state LED — no filament to burn out, and no warm-up lag
LED Lifespan
50,000 hours
Power Draw
Uses 70% less power than an equivalent halogen assembly
Cooling
Aluminum heat-sink base with a temperature-control IC that holds output steady over time
Weather Sealing
IP67 — sealed against rain, dust, and road spray
Tested For
Vibration, mechanical shock, and corrosion resistance
Installation
Plug-and-play into the factory harness, with CANbus decoders built in — no cutting, no splicing, no dash errors. Everything needed to prevent hyper-flash is included — built into the light or packed in the box
Guides and Documents
- Installation Instructions
- Fitment Guides
Get Seen. Get Noticed. Put On a Show.
Four things separate a RIGNOX tail light from a stock housing: the signature you wear, the finish that lasts, the brake light that registers sooner, and the show it runs at night.App + Remote, Mode by Mode
Applies to: Smoked RGB w/ App Control
App + Remote
Dial it in from the free Star Light Running app, then switch to a static red driving light with one tap on the included remote — no phone needed when you're rolling.
Mode by Mode
Set distinct effects for Driving, Startup, and Turn-Signal lighting — each its own show, not one effect for everything.
Any Color, Any Effect
Pick any color from the wheel, run dynamic animations, or auto-cycle them all across the full bar — your build, your palette.
Locked Left to Right
Master-and-slave signal cabling keeps both sides perfectly synced for one seamless light show.
Full App Setup & Pairing Guide →
Images show lighting concepts for illustration only and may differ from actual output. The app interface shown is representative — see the full app guide for real setup and controls.
Unique Features
hrs
Rated LED Lifespan
% less
Less Power Than Halogen
Matte Black
Aggressive and Sporty Aesthetic
Mounts
Factory-Fit Install
The RIGNOX Standard
- 10K+Orders shipped
- 20+Years in lighting
- 80+Vehicle fitments
- Complete assemblies, not bulb kits
- Factory mounts, factory harness
- Built with patented optical parts
- Third-party tested LEDs
- DOT / SAE compliant
- CANbus decoders built in

